Customized Parts & Components

We never sell items manufactured by anyone else.
Every item we sell is either custom made or modified on site specifically for the customer.
MY PRODUCTS ARE CUSTOM MADE. PLEASE CONTACT ME DIRECTLY VIA THE
CONTACT PAGE FOR ORDERING INFORMATION OR TO DISCUSS CUSTOM DESIGNS
ALL E-MAILS RESPONDED TO WITHIN 24 HOURS
[email protected]

IMPROVED COOLING ADAPTOR FOR OLDS

Adapter sandwiches between water neck and intake manifold. Provides for installation of engine rear corner coolant return lines. Designed to be used w/air gap manifolds. Improves cooling at rear of block and heads.
$100.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFORMATION

COOLING ADAPTOR W/SWIVEL NECK & MATCHING CLAMP

Adapter sandwiches between water neck and intake manifold. Provides for installation of engine rear corner coolant return lines. Designed to be used w/air gap manifolds. Improves cooling at rear of block and heads.
$200.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFORMATION

OVERSIZE HEAD MAG WHEEL NUTS (SET OF 10)
(note the difference between off-the-shelf nuts at the bottom of the photo and the TRM design above)

Oversize heads to prevent damage to expensive aluminum wheels
Made from 12L14 alloy steel
7075 aircraft aluminum washers
1/2-20 or 7/16-20 thread
Must specify required shank length
$120.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

INSTALLATION INSTRUCTIONS FOR MAG WHEEL NUTS

Custom Made Wheel Spacers

Made from 6061 aluminum
Any thickness
Any diameter
Any hole pattern
Pair-Up to 6” diameter and 1/2” thickness - $75 plus shipping
Pair-Over 6” diameter or greater than 1/2” thickness - $100 plus shipping
PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFORMATION

Must Specify:

O.D.
I.D.
Hole Pattern
Stud Diameter
Thickness

WHEEL SPACER ORDER FORM

Electric Water Pump Inlet Modification

Increases the Outside Diameter to Fit Larger Inside Diameter Hoses
Made from 6061 aluminum

$50.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

Olds Crank Trigger Distributor

525.00 if you provide original Olds core w/gear
$625.00 if I make new base and new steel gear
$700.00 w/new base and new bronze gear
50% down, 50% plus shipping when shipped
PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFORMATION

OLDS CRANK TRIGGER COMPONENTS

Custom Made - Call for prices

Olds Rocker Arm Stud Girdles - Available for Iron or Aluminum Heads

Stabilizes Valve Train

Includes Tall Rocker Adjustment Nuts
Made from 6061 aluminum

$200.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

VACUUM PUMP DRIVE ARBOR

Designed for your specific needs

Made from 6061 aluminum
$100.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

ALUMINUM HOOD PIN KIT

For the REALLY weight conscious racer!

Made from 7075 high strength aluminum
1/2-20 thread w/aluminum nuts & washers
Any Pin Diameter
Also available for deck lids

(does not include clips)

$60.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

ADJUSTABLE UPPER CONTROL ARMS FOR GM A-BODY

Made from 7075 high strength aluminum

Includes 5/8" rod ends
Includes spacers for rod end mounts to frame
Std. length or any center to center distance
5/8-18 rod end mounting bolt included

$300.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

ALUMINUM LOWER CONTROL ARMS FOR GM A-BODY

For the weight conscious racer

Made from 6061-T651 aluminum
Grease fittings for bushing sleeves
Drilled for anti-sway bar attachment
Comes w/grade 8 bolts & locknuts
$300.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

OLDS IRON HEAD SPARK PLUG SPACERS

Allows use of more common 3/4" reach racing spark plugs in 3/8" reach Olds iron heads

Made from 7075 aluminum
set of 8 pieces
$50.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

OLDS CRANK TRIGGER KIT

Mounting Bracket Doubles as Block-Off Plate

Modified to fit your specific balancer
$700.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

ALUMINUM MAG WHEEL NUTS (SET OF 10)

The ultimate lug nut for the weight conscious racer!

Nuts & Washers made from high strength 7075 aircraft aluminum
Oversize 7/8" hex head
Available in 7/16-20 & 1/2-20 threads
Customer must specify shank length
$150.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

OLDS FUEL PUMP HOLE BLOCK-OFF PLATE

6061 aluminum fuel pump hole block-off plate

316 stainless flat head screws
$40.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

V-8 Olds Distributor Hole Plug
Prevents debris from entering your valuable engine when the distributor is out.

Made from 6061 aluminum
Complete with O-ring for positive seal

$40.00 plus shipping PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

Olds Oil Fill Tube Hole Plug
Replaces stock oil fill tube cleaning up engine compartment. Replace original tube for adding oil or oil changes.

Made from 6061-T6 Billet Aluminum
Complete w/ O-rings (2) for positive seal.
$40.00 plus shipping. PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

Olds Back-Grooved Clevite AL-3 Cam Bearings

The only material that will stand up to the spring pressures required for roller cams.
Back-Grooved so that the oil hole can be rotated to the optimum 2-3 o'clock position.
Includes detailed installation instructions.
$105.00 plus shipping. PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO

Olds Precision Slotted Main Bearings

Precision Slotted for Increased Oil Flow to Main and Rod Journals.
Available in Street / Strip or Competition materials.
Slotted, de-burred, and Scotchbrited ready for installation.
$120.00 for Street / Strip Bearings, $180.00 for Competition Bearings plus shipping.
PLEASE CONTACT ME DIRECTLY VIA THE CONTACT PAGE FOR ORDERING INFO